Produits
-
0 Degree Pole Mount Compatible with Garmin LiveScope Plus LVS34, Dual-Side Scan, Replaces 010-13228-03 (Double Mounts) -
0 Degree Pole Mount Compatible with Garmin LiveScope Plus LVS34, Replaces 010-13228-03 -
0 Degree Pole Mount Compatible with Garmin LiveScope System (LVS32), Replaces 010-12784-01 -
0 Degree Pole Mount Compatible with Garmin LiveScope XR LVS62, Replaces 010-13248-00 -
0 Degree Pole Mount Compatible with Lowrance Active Target2, Replaces 000-15770-001 -
0 Degree Pole Mount with C Size/1.5'' Ball, Compatible with Garmin LiveScope Plus LVS34, Replaces 010-13228-03 -
0 Degree Pole Mount with C Size/1.5'' Ball, Compatible with Garmin LiveScope Plus LVS34, Replaces 010-13228-03 -
0 Degree Pole Mount with C Size/1.5'' Ball, Compatible with Garmin LiveScope Plus LVS34, Replaces 010-13228-03 (Double Mounts) -
0 Degree Pole Mount with C Size/1.5'' Ball, Compatible with Lowrance Active Target2, Replaces 000-15770-001 -
0 Degree Pole Mount with Clamp, Compatible with Garmin LiveScope Plus LVS34, Replaces 010-13228-03 -
0 Degree Pole Mount with Clamp, Compatible with Garmin LiveScope Plus LVS34, Replaces 010-13228-03 -
0 Degree Pole Mount with Clamp, Compatible with Garmin LiveScope Plus LVS34, Replaces 010-13228-03 (Double Mounts) -
0 Degree Pole Mount with Clamp, Compatible with Lowrance Active Target2, Replaces 000-15770-001 -
Support à double rotule 1" avec deux plaques rondes AMPS, bras en aluminium long (17 cm/6,7") et adaptateurs à rotule 1"/25 mm/taille B, compatible avec RAM, Arkon, iBolt et plus encore. -
Support à double rotule en aluminium de 1,5" (taille C) avec bras d'extension (18,3"), support pour tablette/sondeur, bras à double douille avec deux plaques rondes AMPS, compatible avec RAM, Arkon, iBolt et plus encore. -
Support de sondeur en aluminium de 1,5" (taille C) avec bras d'extension (18,3"), support électronique/de profondeur marin pour bateau, rotation à 360°, compatible avec Garmin, Lowrance, Humminbird et autres. -
Support de sondeur WINDFRD en aluminium à boule de 1,5" avec base de fixation à pince pour rails de 1,18" à 2" de diamètre, support électronique/de profondeur marin à bras moyen pour bateau, compatible avec Garmin, Lowrance et autres -
Support de sondeur électronique marin à boule de 1,5" pour grands sondeurs de 9 à 12", compatible avec Garmin, Lowrance, Humminbird et autres. -
Support de détecteur de poissons à boule de 1,5" pour kayak -
Support de détecteur de poissons à boule de 1,5" avec bras court -
Support de sondeur à boule WINDFRD 1,5", support électronique marin à bras moyen, plaque de montage universelle avec adaptateurs à boule 1,5 pouces / 38 mm / taille C, compatible avec Hummingbird Helix 5,7 et plus. -
Support de détecteur de poissons à boule de 1,5" avec bras moyen -
Support de sondeur de kayak à boule de 1,5" avec bras de fixation pour transducteur, plaque de montage électronique marine avec rail discret, compatible avec les supports RAM, Scotty, Lowrance et Garmin. -
Support à double rotule 1,5" avec deux plaques rondes AMPS, tablette, support pour détecteur de poissons, bras pivotant à cliquet à double douille avec rotule 1,5" (38 mm) de taille C, compatible avec RAM, Arkon, iBolt et plus encore.
finder your mounts
Let customers speak for us
Very well made.
Robert Twiss
All Aluminium Fish Finder/Chartplotter Mount, 360° Swivel Adjustable, Securely Holds 7" to 16" Screens (Flat Mounting)
Great product I love the versatility!
Chris Carroll
2.25" / D Size Ball Fish Finder Mount with Wrench, 5.1" Long Arm
Heavy duty and secure
I've got 2 now. The first one works so well and secure that I bought one for the front.
Robert wiley
All Aluminium Fish Finder/Chartplotter Mount, 360° Swivel Adjustable, Securely Holds 7" to 16" Screens (Flat Mounting)
Quality product
Shipped quickly and was as described. Good quality!
Woods
Aluminum Fish Finder Mount with 1.5 Inches/C Size / 38mm Ball
solid and versatile.
Had this for over a year now and it works great. Installed on my boat for the GPS and it is solid and versatile. stays right where you set it.
craig768
Aluminum 1.5" Ball Double Ball Mount
Solid metal. Good for smaller fish finders
Solid metal and strong. Great for smaller fish finders that don't weigh as much. 12 inch screen is a little too heavy and might cause the mount to move. Should be no problem if you use only electric to move around your boat. Driving with a gas motor or just transporting it while mounted can cause it to move. For the price it's a solid choice for me and meets all my needs. Hope this helps
Scott
Aluminum Fish Finder Mount with 1.5" / C Size Ball, Heavy Duty 9.1" Long Arm
Rock-Solid Mount for My Garmin EchoMap 10
This mount exceeded my expectations! I used it to secure my Garmin EchoMap 10-inch unit, and it held up perfectly even in rough water. The build quality is outstanding—sturdy, well-constructed, and designed to handle the weight of larger electronics without any wobble or vibration.Installation was quick and easy, and the adjustable angles make it simple to position the screen for the best visibility. Whether I’m cruising or fishing in choppy conditions, my Garmin stays locked in place with zero issues. If you need a reliable, heavy-duty mount for your fish finder, this is definitely the one to get. Highly recommend!
Brandin Harrison
1.5" Ball Fish Finder Mount for 9" to 12" Large Fishfinder with C Size Ball
Happy Customer
The 1.5" Ball mount fit my Lowrance FS 10 perfectly. The base mounted to the gunwale solidly and makes a great way to mount my electronics when there wasn't much space available for mounting. Easy on easy off set up. I recommend this product and would purchase again.
Amazon Customer
1.5" Ball Fish Finder Mount with Medium Arm
Solid feeling
Surprisingly guilty tough. Works well and the adjustments are good.
Peter Lee
1.5" Ball Fish Finder Mount for Kayak
Easy to install. it adjust to exactly where you need it
Nice item
mike siliven
1.5" / C Size Ball Aluminum Fish Finder Mount with Extension(18.3") Arm
Stable, solid and durable design.
Actually ordered a Yakattack mount for my 93sv, despite the reviews saying that the unit bounces around with that mount. Several reviews said that the Yakattack mount was very shaky where it attaches to the boat.Found this one here and it was highly reviewed, plus it was cheaper.I immediately cancelled my order of the Yakattack and bought this. Just installed it today and I’m very happy with it and the stability it has. Solid mount, made from great materials and simple design that looks like it could last for many years.Would buy again.
Dante
1.5" Ball Fish Finder Mount with Medium Arm
Bow Holder
Used this as a component to make an adjustable bow holder for my Polaris. Works great and is well constructed materials.
James Ryan Brawley
Aluminum Grab Bar Clamp Mount Base with 1.5'' Ball for Rails 1.18'' to 2'' in Diameter
Ram mount bracket
Seems to be of good quality, worked great for my lowrance hook 7.
Don
Aluminum Fish Finder Mount with 1.5 Inches/C Size / 38mm Ball
Works great on my Kayak easy to install
Easy to install on my kayak works great. Good quality
Jason littlefield
1.5" Ball Fish Finder Mount for Kayak